Briteline® MultiGRIP is great for both Floor and Wall graphics printed on large and wide format printers. It is a 14 mil textured PVC film that can be applied to nearly any surface and accepts solvent, latex, and UV ink. It is recommended for indoor and short-term outdoor applications and provides a solution for tradeshows, POS and retail, universities, and events.
Downloadable Product Sheets
Briteline™ Multigrip 
Applications
Designed for wall and floor graphics, both indoor or short term outdoor use. Surfaces include, but are not limited to; carpet, tile, metal, properly painted surfaces, wood and PVC floors, untreated stone, smooth concrete, asphalt, brick and ceramic tile. (Durability varies)
Application Instructions
Remove dirt and debris from the surface the graphic will be applied to; recommended application surface temperature is 50°F. Use a soft rubber roller or squeegee on the surface of the graphic removing any bubbles and making sure the adhesive is making full contact with the surface.
Removal Instruction
- Peel back a corner at 45° angle. With even continuous motion, pull back graphic at a 180° angle.
Thickness
- 14 mil
Ink Compatibility
- Solvent, Eco-Solvent, Latex, UV
Available Sizes
| 48" x 100' | SKU BL-MG48100 |
| 48" x 25' | BL-MG4825 |
Features & Benefits
- Non-slip textured film good for Floors & Walls
- Reinforced with fabric on the adhesive side
- Adheres nearly any surface
- Remove with little to no residue left behind
- Eliminates the need for a UL approved anti-slip laminate
