Translucent PVC Film
A 3.2-mil premium translucent calendered PVC film coated with clear 200-4999 permanent acrylic pressure sensitive adhesive laminated to a 90# layflat liner. This vinyl film is designed to accept a variety of solvent-based inkjet and UV curable inks common to wide format digital printing systems. Briteline® Translucent may be printed using other common printing processes such as UV curable screen and UV curable offset but must be tested before production.
Downloadable Product Sheets
Briteline® Translucent PVC Film Specifications Briteline® Application Chart 
Applications
This product is a premium pressure sensitive decal film with uniform light diffusion properties used to produce backlit displays for applications such as taxi tops, backlit bus displays and any other application requiring backlighting. Briteline® Translucent offers excellent bond to substrates such as polycarbonate, styrene and acrylic sheeting while maintaining easy installation and removal properties.
Adhesion
To stainless steel: 16 oz/in. Tested according to PSTC-101 with 24 hr. dwell at 70°F and 50% relative humidity. Typical values. Individual values may vary. Test thoroughly before production.
Thickness
| Film | 3.2 mil |
| Adhesive | .8 to 1.1 mil |
| Liner | 6.7 mil |
| (Thickness variance ± 10%) | |
Available Sizes
| 54” x 30’ |
| 54” x 150’ |
Surface Gloss
- N/A
Dimensional Stability
- Good
Light Transmission
Approximately 15% at 550 nm.
Temperature Ranges
Minimum application temperature is 40°F.
Service temperature range is -40°F to 180°F.
Storage Stability
1-year shelf life when stored at 70°F and 50% relative humidity.
Expected Exterior Exposure
Under normal conditions, up to 5 years, resistance can be expected. Removable up to 1 year.
Recommendations
Completely evaporate inkjet solvents before application. Failure to do so may facilitate solvent penetration resulting in vinyl degradation.
