Cast Vinyl Film
Briteline® WrapCast vinyl is a 2-mil cast film with ultimate durability and conformability. The adhesive has an initial low tac making repositioning the graphic effortless. This film is ideal for applying vehicle graphics with curves and/or rivets. The print quality of this film will give your graphics a consistent pop every time, whether you are printing with solvent, eco-solvent, latex or UV.
Downloadable Product Sheets
WrapCAST Vinyl Film Specifications WrapCAST Vinyl Film Sales Sheet Briteline® Application Chart 
Applications
This film is designed for vehicle graphics with complex curves, rivets, and deep channels. Briteline® WrapCast has a low initial tac allowing it to glide across the substrate until it is in the desired position, making it a preferred film for a single installer.
Recommendations
Completely allow inkjet solvents to evaporate before applying laminations or prior to installation. It is highly recommended to pair Briteline® WrapCast vinyl with Briteline® WrapCast overlaminates.
Face Material
| Type | Cast Vinyl |
| Color/Finish | White gloss |
| Thickness | 2.0 mil ± 10% |
| Tensile Strength (MD) | 3 lbs./in |
| Elongation at break along | >100% |
| Durability unprocessed | 10 years/td> |
Liner
| Type | Textured Airex Liner |
| Color/Finish | White |
| Weight | 135g/m2 ± 10% |
| Thickness | 6.0 mil ± 10% |
Available Sizes
| 54” x 150’ |
Removability
Heat or chemicals may be used during film removal from the substrate.
Ink Compatibility
Optimized for ink jet printing with solvent, eco-solvent latex and UV inks.
Adhesive
| Reference | AP921 |
| Type | Solvent Repositionable |
| Min. Application Temp. | 50° F |
| Service Temp. | -40° F/ 200° F |
| Initial Adhesion | >3.2 lbs./in |
| Final Adhesion | >4.9 lbs/in |
Shelf Life
12 months
- Store in conditions that are at a temperature of 20-25deg. And 40-50% Humidity
- Store in a cool & dry place.
- Do not store close to a heat source or in direct sunlight.
- Keep material in its original packaging until ready for use.
